SUNMAX SM860 34" Ride-On Commercial Floor Scrubber

Overview

The SUNMAX SM860 is a wide dual-brush ride-on floor scrubber for large warehouses, shopping centers, schools and industrial facilities. Its 34-inch scrubbing path, 41.7-inch squeegee and large separate tanks are intended for open routes where coverage and fewer tank stops are priorities.

Why choose this model?

• A dual-brush deck provides wide coverage for large open floor areas.
• Ride-on operation reduces walking during extended cleaning routes.
• The specifications list a 34.3-gallon solution tank and 37-gallon recovery tank.
• A seated operating position and machine controls support routine facility cleaning.

Controls and practical features

One-touch controls raise or lower the brush plate and squeegee. The manufacturer lists a 51-inch turning radius, which should be considered alongside machine width when checking aisle ends and storage access.

Specifications

Productivity and runtime are manufacturer ratings, not guaranteed results for every facility. Turns, obstacles, soil level, tank stops and cleaning settings affect actual output.

Buying Guide

Will it fit my cleaning route?

A wide cleaning path is useful for open areas, but the complete machine and squeegee need sufficient clearance. Measure doorways, aisles, turning areas and storage access before ordering; brush width alone does not determine whether the machine fits.

Which power configuration am I buying?

This listing is the standard battery configuration shown in the specifications. Plan a complete charging window between routes and follow the battery-care instructions. Actual runtime varies with the workload and battery condition.

Which floors can it clean?

For approved hard floors such as sealed concrete, tile, epoxy and vinyl. Check the floor manufacturer’s maintenance instructions and choose a compatible brush or pad and detergent. Water-sensitive wood, laminate, coatings and polished finishes need particular care. This machine is not a carpet extractor.

Ask CleanGearHQ for help choosing a model. Share your floor type, usable cleaning area, narrowest aisle or doorway and charging or outlet access so we can help check the fit.

Compare before choosing

Compare the SUNMAX RT70 for a narrower ride-on machine and the SUNMAX RT120+ for wide self-propelled walk-behind cleaning.

Support

Operation and routine care

• Use a floor-compatible, low-foaming cleaning solution and follow its dilution instructions.
• Drain and rinse the recovery tank after use, and inspect the brush, squeegee and suction path for debris.
• Check brushes, pads and squeegee blades regularly; these are maintenance items that wear with use.
• Follow the battery and charger instructions before first use, between shifts and during storage.

Download the manufacturer’s SM860 operation and maintenance manual.

Before first use

SUNMAX says small amounts of test water or green transit-protection fluid may remain after factory testing. Follow the operating instructions for the initial rinse and setup.

Replacement parts

For replacement-part help, provide CleanGearHQ with your model, order number and photos of the part. Confirm brush, pad and squeegee compatibility before ordering; availability varies.

Warranty support

SUNMAX publishes a two-year limited manufacturer warranty for eligible defects in non-wearable parts under normal use and maintenance. Brushes, pads and squeegees are consumables rather than covered wear items. Keep proof of purchase; manufacturer eligibility, exclusions and claim assessment apply. Contact CleanGearHQ for help confirming coverage or starting a claim.

Delivery and returns

Review our shipping policy and return policy before purchasing. For larger equipment, contact us to confirm delivery access and any receiving requirements for your location. CleanGearHQ is your point of contact for order questions and return or warranty assistance.