The Makinex Dual Pressure Washer 2500 PSI combines a 21-inch rotary surface cleaner and pressure-washer wand in one commercial cleaning machine. A simple control allows operators to change functions quickly, while adjustable pressure from 1,000 to 2,500 PSI provides the flexibility to clean a range of exterior surfaces with one unit.
The U.S. DPW-2500-0A-VU-50 configuration uses a pull-start Vanguard engine, a 50-foot high-pressure hose, and an AR Triplex geared pump. Locking front casters, vibration-reducing engine mounts, a folding handle, and an integrated lifting eye support practical operation and transport between jobs.
Product Features
- Two-in-one rotary surface cleaner and pressure-washer wand
- Adjustable pressure from 1,000 to 2,500 PSI
- 21-inch stainless-steel-surfaced rotary cleaner
- Pull-start Vanguard 25V3 engine
- 50-foot high-pressure hose for extended reach
- AR Triplex geared pump with thermal protection
- Two-to-one gearbox reduction
- Built-in pressure gauge and inlet water filter
- Vibration-reducing rubber engine mounts
- Front locking caster wheels
- Heavy-duty powder-coated compact frame
- Folding handle and lifting eye for transport and storage
Technical Specifications
| Product Code | DPW-2500-0A-VU-50 |
| Pressure Range | 1,000–2,500 PSI |
| Flow Rate | 2.5 GPM |
| Rotary Cleaner Size | 21 inches |
| Hose Length | 50 feet |
| Engine | Pull-start Vanguard 25V3 |
| Fuel | Unleaded gasoline, 86 octane or higher |
| Fuel Tank | 0.8 gallon |
| Pump | AR Triplex with gear reduction, internal bypass unloader, and thermal release valve |
| Sound Level at Handle | Approximately 92 dBA |
Product Dimensions
| Compact Length | 3 ft. 9 in. |
| Width | 1 ft. 10 in. |
| Compact Height | 2 ft. 5 in. |
| Weight | 145 lb. |
Included Equipment
- 21-inch rotary surface cleaner
- Spray gun and wand
- 50-foot high-pressure hose
- Integrated switching valve
Recommended Applications
- Parking lots and commercial plazas
- Driveways, paths, and sidewalks
- Tennis courts and sports grounds
- Poolside areas and patios
- Decks and building exteriors
- Machinery and equipment
Setup and Safety
Read the operator’s manual before setup or use. Operate this gasoline-powered machine only in a properly ventilated outdoor area. Always connect and turn on the water supply before starting the engine, and do not exceed the machine’s rated pressure. Makinex recommends boots, gloves, long pants, safety goggles, and hearing protection.
Shipping and Delivery
- Free standard shipping is included for eligible addresses in the contiguous 48 United States.
- This DPW/DPC machine ships by LTL freight from Makinex’s Texas facility.
- Inventory availability and estimated ship date are confirmed after order review. Carrier and tracking details are provided when available.
- Residential delivery and liftgate service may require an additional charge. Limited-access, inside-delivery, appointment, redelivery, and storage services are not included unless stated in writing and may also cost extra.
Standard freight delivery is curbside or to an accessible business receiving area; it does not include unpacking, assembly, inside placement, or white-glove service. Inspect the shipment before signing the delivery receipt. Note any visible damage or shortage on the bill of lading, take photographs, and keep all packaging. Refuse severely damaged freight when reasonably possible. Report visible or concealed damage to CleanGearHQ within 48 hours of delivery so we can promptly coordinate the freight claim. This reporting request does not limit rights that cannot legally be limited.
Contact CleanGearHQ immediately if you need to cancel or change the delivery address. Once Makinex begins processing the order or books freight, cancellation or address changes are not guaranteed and documented supplier or carrier charges may apply, except where a refund is required by law.
Warranty
Makinex provides a one-year limited warranty to the original purchaser for defects in materials or workmanship, subject to the manufacturer’s terms and exclusions. The warranty is non-transferable. Engine components are covered separately under the engine manufacturer’s warranty. Wear items, consumables, attachments, accessories, misuse, improper setup or maintenance, unauthorized repairs or modifications, theft, cosmetic damage, and other excluded causes are not covered.
Proof of purchase and maintenance records may be required. The customer is responsible for transportation when submitting equipment for warranty inspection or service. If Makinex approves a repair or replacement, Makinex or its authorized dealer pays return transportation within the same domestic territory.
Returns and Exchanges
Contact CleanGearHQ within 7 calendar days of delivery to request return authorization. Do not ship a product back until a Return Merchandise Authorization (RMA) and return address have been issued.
- Eligible returns must be unused, in new and saleable condition, and in the original undamaged packaging.
- All returns are subject to Makinex inspection and approval.
- Approved returns within the supplier’s 30-day eligibility period are subject to a 25% restocking fee.
- No return or credit is available after 30 days from the supplier invoice date.
- The customer is responsible for return freight, loss or damage in transit, and carrier claims. Original shipping charges are not refundable.
- Approved exchanges require a new order. Eligible exchange returns are subject to a 15% restocking fee within 30 days; exchanges are not accepted after 60 days from the supplier invoice date.
- If the wrong product was shipped, CleanGearHQ will coordinate correction without charging return freight or a restocking fee.